Click here to go straight to 1/300 scale sets at bottom of page

CLICK ON PRODUCT CODES FOR SCANS OF SAMPLES

Please note US $ prices are approximate only

**GMM 1/350 SCALE PE SETS**

350-1 MODERN NEW JERSEY 32.17 GBP ($51.47) Contains: Railing in several styles including pre-shaped railing sections for upswept bow, vertical and inclined ladders, flight deck safety netting, aircraft crane, SPS-6, SPS-10, and SPS-49 radars, helicopter refuelling stations, SH-60 helicopter rotors, UnRep gear details, bridge window frames, life raft backs, funnel cap grilles, various ECM and mast details, Stokes litters, watertight doors and assorted bulkhead details.

Fits Tamiya or Revell modernized USS New Jersey.

350-2 USS ENTERPRISE  32.17 GBP ($51.47) Contains: Railing in several styles including specialized rails for mast yardarms and aircraft elevators, vertical and inclined ladders, accommodation ladders, pre-shaped flight deck safety netting, aircraft refuelling hose reels, island safety cage ladders, perforated mast yardarms, SPS-10, SPS-48, and SPS-49 radars, SatCom and RDF antennas, watertight doors, bicycles, and Stokes litters.

Fits Tamiya Enterprise (CVN-65).(SEE ALSO: 350-2A 1/350 Enterprise Elevators)

350-2A USS ENTERPRISE  ELEVATORS 21.45 GBP ($34.32) Contains: Perforated elevator platforms to replace the four solid plastic platforms included in Tamiya kit of CVN-65 USS Enterprise in 1/350 scale. Etched in heavy sheet brass with full see-through gridwork, reinforcing strips, tie-down rings, and even the extended plating on Elevator No. 2 as seen in prototype reference photos. Sheet styrene can be used for side plating on underside by using the kit's elevators as guides, or the plastic side plating may be carefully cut away from the Tamiya elevators and transferred to the etched brass versions if desired. These four etched platforms are exact matches for the plastic parts to ensure a precise fit. Instructions are etched into the edge of the brass sheet.

Fits Tamiya Enterprise (CVN-65).

350-3 1/350 MERCHANT SET 32.17 GBP ($51.47) Contains: Railing in several styles (3, 4 & 5-bar), vertical ladders, railing for stairways, crane details, lifeboat rigging, life preservers, special ratlines for Titanic and Lusitania.

Fits Entex/Minicraft Titanic and Entex/Gunze/Revell Lusitania. Also see sheet 350-15 below for further detail parts for these models.

350-15 1/350 GOLD PLUS TITANIC/LUSITANIA EXTRA LINER DETAILS 14.30 GBP ($22.88) Contains: Replacement X-frame bracing for eight cargo crane booms, crane boom supports (when cranes are stowed), wireless antenna spreaders with integral rigging fittings, docking bridge support girders, ship's wheel, replacement support legs for Titanic's compass tower, lifeboat safety ropes, deck benches and 52 fold-to-shape deck lounge chairs.

Supplements GMM No. 350-3.

Specific parts for both Titanic and Lusitania kits in 1/350 scale. Illustrated instructions.

350-16 1/350 TITANIC FIGURES 233 Crew and Passengers 7.15 GBP ($11.44) Contains: Over 200 figures relief-etched in 3-D in .013" thick brass for extra depth and detail. Features adult and child passengers, crew figures, and four member of ship's orchestra (three violinists and one cellist) complete with instruments. Also includes figure of Titanic Captain E. J. Smith with beard and overcoat. 3-D features include early 20th Century clothing styles including hats, coats, and ties.

Fits 1/350 scale Titanic and Lusitania kits. Painting required.  Illustrated instructions.

350-X 1/350 TITANIC SKYLIGHTS lifeboat tie-downs and crane railings 11.91 GBP ($19.06)  Limited run set.  Buy it while you can!

350-19  1/350 TITANIC DAVITS 14.30 GBP ($22.88) Provides replacement davit assemblies (with spares) in 3-D relief-etched .010" brass for Minicraft's 1/350 scale Titanic kit. Can be assembled either in stowed or deployed positions.

Fits Minicraft 1/350 scale Titanic kit. Painting required. Illustrated instructions.

350-4 WW2 USN Battleship for Tamiya MISSOURI  34.89 GBP ($56.00) Contains: Railing in several styles including pre-shaped sections for upswept bow, vertical and inclined ladders, aircraft catapults and recovery crane, cable reels, 20mm gun armor shields, funnel cap grilles, Mk. 37 director radars, SK, SK-2, Mk. 3, Mk. 27, and SG radars, ECM antennas, yardarms, bridge window frames, aircraft propellers, watertight doors, and assorted bulkhead details.

**Fits Tamiya or Revell Missouri. Includes surrender table & chairs.

350-4A WW2 USS MISSOURI FINE DETAILS  34.89 GBP ($56.00) Contains additional details for use in conjunction with GMM 350-4.

Fits Tamiya 1/350 Yamato & Musashi kits (SEE ALSO: 350-5A Gold PLUS Yamato/Musashi Fine Details)

350-5A YAMATO/MUSASHI FINE DETAILS 17.87 GBP ($28.59) Contains: Two see-through grilles for the sides of the aft main deck, 29 assorted see-through ventilator grilles for the superstructure, 34 support structures for overhanging decks, 3-D relief-etched aircraft trolley track rails and turntables with drilling jig, 32 25mm gun bases, 30 assorted watertight doors, 28 assorted deck hatches, two correctly shaped hawsepipes with covers, three strips of bridge window frames, six life buoys with two release racks, four correctly detailed searchlight bases, 15 detailed inclined ladders in four sizes, ten leadsman's and sounding platforms in two styles, two foghorn platforms, 32 25mm ammunition box covers, 24 boat oars, six small antennas, two Type 21 "GO" radar braces, and a Musashi-specific crane kingpost (mast.) Complements GMM No. 350-5 Yamato/Musashi ship set.

Fits Tamiya WW2 battleships Yamato & Musashi .

350-6 BISMARCK/TIRPITZ for Tamiya/Academy kits 32.17 GBP ($51.47) Contains:  Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, aircraft catapult, funnel cap and uptake grilles, crane details, boat details, seaplane struts and propellers, hangar doors, FuMo 23 radars, bridge wing rails and supports, yardarm footrails, watertight doors, and bulkhead details

Fits Tamiya 1/350 Bismarck and Tirpitz kits.

350-7 KGV/PRINCE OF WALES for Tamiya kits 32.17 GBP ($51.47) Contains: Railing in several styles including pre-shaped sections for upswept bow Vertical and inclined ladders, funnel cap grilles, aircraft propellers, search and fire control radars, crane details, boat details, yardarm footropes, 20mm gun armor shields, watertight doors, bulkhead details.

Fits Tamiya 1/350 King George V and Prince of Wales.

350-8 NAVAL FIGURES (also suit 1/400) 3.57 GBP ($5.71) Contains: 100 figures, assorted poses, relief etched in brass.

350-10 40mm QUAD BOFORS & 20mm OERLIKON DETAILS 5.70 GBP ($9.12) Contains: Gunsights, railing, shields, and other details for equipping twenty-five 40mm quad Bofors and sixty 20mm Oerlikon anti-aircraft guns.

Fits Tamiya Missouri, King George V, and Prince of Wales, plus others.

350-12 MODERN USN WARSHIP  32.17 GBP ($51.47) Contains: Railing in several styles including pre-shaped sections for upswept bow. Vertical and inclined ladders, flight deck safety nets, SH-60 helicopter rotors, yardarm footrails and anemometers, screws for Spruance and Ticonderoga-class ships, SPS-6, SPS-10, SPS-12, SPS-29, SPS-40, and SPS-49  radars.

Fits DML/Revell Spruance and Ticonderoga kits.

350-13 WWI EMDEN/DRESDEN 23.36 GBP ($37.38) Contains: Railing in several styles, vertical and inclined ladders, accommodation ladders and davits, ratlines, boat details, ship's wheels, compass platform, mast platform supports, anchor chain.

350-20 KONIG CLASS BATTLESHIP 26.68 GBP ($42.69) Contains: Over 4,000 scale feet of railing in four styles including "drooped chain" type for the main decks, solid-type rails for upper decks, and simulated canvas-covered rails for bridge and searchlight platforms; vertical ladders, inclined ladders with perforated sides and correct handrail configurations; funnel cap grilles, skylight covers in eight styles, hatch covers in two styles, watertight doors (open and closed), yardarm footropes, safety rails and hooks for boat derricks, simulated stud-link anchor chains and chain stoppers, rudders, screws, oars, & stern rails for ship's boats, capstan handwheels & brakewheel, screens and covers for bulkhead vents in five styles, torpedo tube doors in two styles, armored doors for main turrets, conning tower, & aft fire control tower, cable reel, simulated rigging for boat davits & small cranes, paddles & see-through bottoms for life rafts, perforated girders for boat cradles, accommodation ladders with perforated platforms, bow crests & stern nameplates for all four ships in the class, bridge details (helm, engine telegraph, & binnacle.) Illustrated instructions include information on backdating the ICM kit to pre-Jutland configuration. Extensive 3-D relief etching throughout.

350-21  USS HORNET 34.89 GBP ($56.00) Contains: Railing, ladders, cranes, catwalk and bridge wing supports, leadsman's platforms, CXAM and SC air search radars, Mk. 4 fire control radars, 20mm Oerlikon machine gun details, detailed yardarms, boat rudders and railings, funnel cap grilles, chocks in two styles, three-level ladder structure for island's aft end, life raft paddles, life rings, "horseshoe" life buoys with racks, cable reels, retractable flight deck and elevator safety rails, 1MC speaker faces, watertight doors, B-25 aircraft propellers, ship's screws, conversion parts for pilot house and primary flight control station, relief-etched figure of Lt.Col. James H. Doolittle.

350-21A  USS HORNET FINE DETAILS 34.89 GBP ($56.00) Contains: See-through perforated catwalks for surrounding funnel and flight deck, arresting gear sheaves, boat chocks, more. Complements GMM No. 350-21 USS Hornet shipset.

350-22  USS ESSEX 34.89 GBP ($56.00) Contains: Railing (including custom fitted rails for bow and stern and specialized rails for numerous other areas such as elevators & hangar openings); twelve vertical ladders; 28 inclined ladders (including 16 short ladders for flight deck access); one boat rudder with pulpit & cradles; main and secondary yardarm; search and fire control radars (SK, SK-2, SC-2, SP, SM-1, SG, two Mk. 12 with IFF, and two Mk. 22); assorted smaller antennas (TDY, TDY-1, YE beacon, and two types of ECM antennas); two hooks for cranes; two funnel cap grilles; 28 watertight doors; two mast platform supports; five platforms and two latticework tower masts for all variations of radar installations; one whistle platform; one BM antenna platform; four cable reels; 52 carrier-style floater net baskets; five deck-edge radio antenna masts with protective screens for second and fifth antenna masts; two ventilator grilles; one LSO platform with one catwalk, two choices of windscreens, & safety net; deck-edge elevator girders & nets; three leadsman's platforms; two simulated stud-link anchor chains; and one figure of Admiral Raymond A.Spruance.

350-22A  USS ESSEX FINE DETAILS 34.89 GBP ($56.00) Contains: Perforated flight deck catwalks and sub-flight deck gallery catwalks with fold-up handrails; arresting gear sheaves; flight deck barrier supports; 18 sets of fold-to-shape 40mm Quad Bofors armor shields with folding template, gunsights, & choice of early or late styles of guardrails; 60 sets of 20mm Oerlikon anti-aircraft gun armor shields, handwheels, shoulder rests & gunsights; four sets of 5" 38 cal. open gun mount guardrails; two accommodation ladders; choice of early or late styles of tripod mast braces with platforms and integral railings; four styles of fold-to-shape reproducers (loudspeakers) with support brackets; bridge platform wind deflectors; one forward LSO platform with windscreen & safety.

Complements GMM No. 350-22 Essex ship set.

350-27 1/350 SOVREMENNY CLASS DESTROYER 34.89 GBP ($62.80)

350-30 1/350 USS NIMITZ QUARTER AIRWING DETAILS 16.13 GBP ($29.84) 4 sets needed for a full airwing Contains: 6 F14, 6 A6, 6 A7, 10 FA18 Hornets, 6 F4 Phantoms, 3 S3 Vikings, 2 E2 Hawkeyes, 2 SH3 Seakings, 2 Vigilantes, 2 EA3B Skywarriors.

350-32 1/350 ADMIRAL KUZNETSOV.  36.60 GBP ($67.71)  Contains: Correct style retractable safety railing for the forward flight deck complete with a drilling jig to ease installation; correct pattern Russian-type railing (including turnbuckle detail where appropriate) in several styles with over half being custom fitted to the various decks and platforms in the kit; special retractable safety railing for the two flight deck elevators; vertical and inclined ladders; detailed yardarms with associated platforms; parts for all the required radar antennas (Top Plate, Strut Pair, Palm Frond, Cross Sword, Sky Watch, and CADS-1); detailed antennas and dedicated railing for the Cake Stand array; pre-shaped safety netting for the flight deck; all required ECM, direction finder, and other small antennas; cable reels; anemometers; rotors in folded and deployed positions for a total of six Kamov helicopters; details for the ship's boats; watertight doors in two styles; correct pattern perforated catwalks for several areas on the island; windshield wipers for all appropriate areas in the island; fold-to-shape platforms for several areas on the ship; and two 3-D relief-etched bow crests in early and late styles. Fits the Trumpeter kit.

350-33 1/350 USS LEXINGTON CV-2.  36.60 GBP ($67.71)  Contains: Specialized railing in several styles with numerous pre-shaped and pre-sized sections for ease of installation; pre-sized safety railing for the No. 2 elevator; fold-to-shape inclined ladders in several sizes; vertical ladders; watertight doors in two correct styles with open and closed options; CXAM-1 radar; D.F. loop antennas; pre-sized and correctly patterned safety rails and safety nets for the flight deck; structural supports for several areas of the ship; details for aircraft and ship's boats; two-position flight deck palisades (windbreak) with correct nimber of panels; replacement yardarm with doublers; life raft paddles; see-through life raft bottoms; pilot house equipment; funnel cap grilles; cable reels in two styles; details for .50 caliber, 20mm Oerlikon, and 5" 25 caliber antiaircraft guns; arresting gear sheaves and barricade supports; correct three-bladed screws for the ship's four propeller shafts; and a figure of Captain Frederick C. Sherman, Lexington's last commanding officer. Extra railings and other fittings included for pre-1942 version. Fits the Trumpeter kit.

350-34 1/350 USS NORTH CAROLINA.  35.32 GBP ($63.95)  Contains: Custom fitted and pre-shaped main deck railing with pre-positioned cutouts for chocks and catapults; specialized railing in all the correct styles for upper decks; 26 watertight doors in the correct size and in two styles; sixteen inclined ladders in two sizes; twelve lengths of vertical ladders; SK, SK-2, SC-2, SG, Mk. 3, Mk. 8, Mk. 12, Mk. 22, & Mk. 27 radar antennas; TDY ECM antenna; two TBS antennas; propellers for OS2U and SC-1 floatplanes; two aircraft catapults; stern crane with hooks & rigging; two boat crane booms with hooks & rigging; armor shields with folding template, rails, and gunsights for sixteen (16) 40mm Bofors; similar details for sixty (60) 20mm Oerlikons; gunsights for twelve (12) 5" dual gun mounts; paddles plus perforated bottoms for 22 life rafts in two styles; highly detailed replacement yardarms in the correct sizes for both masts; pre-shaped catwalks and railings plus funnel cap grilles for both funnels; rudders and chocks for two 26' motor whaleboats; two leadsman's platforms; detailed deck hatches in five styles; 24 armored covers for bridge portholes; four ladder well coamings with handrails for superstructure inclined ladders; four cable reels; two anchor hawsepipe screens; six anchor capstan brakewheels in two styles; and eight life preservers. Numerous spare parts are included in the event of loss or damage.

350-37 1/350 HMS HOOD.  35.32 GBP ($63.95)  Contains: Custom railing, vertical ladders, watertight doors in in two styles, inclined ladders "HOOD" nameplate letters, Type 279 and Type 284 radar antennas; boat crane rigging and hooks, small crane rigging, Pom-Pom details, details for Twin 4" guns and 0.5" machine gun mounts; life raft details, mast details, funnel cap grilles, boat and davit details, awning stanchions, replacement aerial spreaders; ladder well railings; accommodation ladders and davits, rigging, footplates replacement degaussing cable.

350-37A 1/350 HMS HOOD EXTRA DETAILS.  22.81 GBP ($41.29)  Contains: Extra watertight doors, more chocks for ship's boats; skylight covers for U.P. deck; thwarts and stern gratings for ship's boats; awning stanchions in bipod and tripod styles; more small handling davits in several styles; relief etched tampions for 15" gun barrels; aircraft catapult and launching shuttle for 1929 - 1932 Hood; struts and propellers for Fairey floatplane provided; aircraft recovery crane with rigging and hooks for 1929 - 1932 Hood; X-turret aircraft platform sections. This set is for experts wishing to add a higher level of detail or wanting to "back-date" the Trumpeter kit into an earlier version.

350-42 1/350 TAKAO  35.32 GBP ($67.11) Contains: Custom fitted and highly detailed main deck and upper deck railings featuring a "drooped chain" appearance; additional railings in several other styles with some sections pre-sized and pre-shaped to fit upper decks, and others offering a choice of simulated canvas coverings for searchlight platforms, etc.; pre-sized rails for the tops of the main gun turrets; two pairs of midships aircraft catapults in two different styles with full interior detailing; aircraft trolleys with shuttles in two styles, aircraft & boat crane with rigging and hook; chocks, rails, & other details for the ship's boats; struts, propellers, & other details for all ship's aircraft types; operators' seats, gunsights, & controls for several types of 25mm antiaircraft guns; three radars of two types; pre-shaped and precisely-fitted maintenance footrails and funnel cap grilles for the funnels; correctly-detailed replacement forward funnel brace structure; accurately detailed yardarms; plus the usual assortment of vertical and inclined ladders, watertight doors, cable reels, eyebolts, turnbuckles, boat davit rigging, and many other fittings.

350-42A 1/350 TAKAO EXTRA DETAILS  23.36 GBP ($44.38) Contains: Complete pre-shaped 3-D relief-etched degaussing cable for later versions of the ship; detailed platform & rails for forward funnel; correctly detailed replacement bracing structures for both masts; replacement fold-to-shape towers for 25mm machine gun mounts and searchlights; detailed thwarts for 9m open boats; a full set of awning stanchions in several styles; two accommodation ladders with davits & canopies; rudders and/or propellers for ships' boats; boat booms with rigging; folded davits for hull sides; 3-D relief-etched davits for ships' boats; torpedo loading davits; 3-D relief-etched sighting covers for main gun turrets; open grilles for all ventilation and air intakes; life rings & racks; leadsman's platforms; flag and jack staffs; control wheels for torpedo tubes; capstan brakewheels; searchlight grilles; detailed brass capstrips for linoleum covered decks; propellers guards; D.F. antennas; and a binnacle for the ship's bridge.

350-44 1/350 USS SAN FRANCISCO  35.32 GBP ($67.11)This set is intended to fit the Trumpeter 1/350 scale kit of the U.S. Navy WW2 heavy cruiser USS San Francisco and her sister ships. Contains custom-fitted railing for the main decks plus ample railing in several styles for all remaining decks and platforms; Inclined and vertical ladders; SK, Mk. 3, Mk. 4, SM-1, SC, SC-2, & SG radars; funnel cap grilles and detailed catwalks for both funnels; armour and/or other details for 40mm Bofors guns, 20mm Oerlikon cannon; 5" 25 cal. gun mounts, & 1/1 inch quad machine guns, see-through bottoms for all life rafts; life raft paddles; correctly detailed replacement yardarms for both masts; watertight doors in open and closed positions; cable reels in two sizes; correctly detailed replacement searchlight platform; two detailed aircraft catapults; two crane booms and rigging; accommodation ladder with davit; rudders, pulpit rails, aft decks, & support cradles for ships' boats; struts and propellers for two SOC Seagull seaplanes; two depth charge roller tracks; life buoys & racks; life rings; two leadsman's platforms; eight replacement 3-D relief-etched splinter shields for 5" 25 cal. gun mounts; assorted handwheels; two propeller guards; and a binnacle for the ship's bridge.

**GMM 1/300 SCALE PE sets**